(726) 233-6044
5.0 RATING (622+ Reviews)
heater installation in Alamo Heights, tx
Need a new heater in Alamo Heights? Honeycomb Heating & Cooling has installed 150+ heating systems across the 78209 zip code and Terrell Hills since 2018. Our team led by Omar Castilleja (27 years experience) specializes in Alamo Heights’ 1950s–1980s slab-foundation and pier-and-beam homes. Heat pump installations start at $10,800, gas furnaces from $8,500. Same-day estimates, 24/7 emergency service. Call (726) 233-6044.
Great company. Got the work done quickly and neatly. Angel and Sergio were super helpful and kind. They did amazing work. Thank you for the great service guys!
Aaron was amazing. I learned a lot about my AC he also helped me put the air duct on my dryer. Very professional great customer service.
Great experience from start to finish and kept me informed each step of the way.
start with a
no pressure visit
We’ll Inspect your system, explain what we see, and let you decide what’s best for your home.
Call Now: (726) 233-6044
REPAIR | INSTALLATION | TUNE-UP: We’ll provide the facts, then you pick the fix that fits your budget.
100% Satisfaction Guarantee
Responsive & Timely Service
Licensed #TACLA140435E
What Is Heater Installation in Alamo Heights, TX?
Alamo Heights was largely built between 1950 and 1985. Most homes along Nacogdoches Road, Arcadia Place, and the streets surrounding the Alamo Heights school campus are slab-foundation or pier-and-beam builds with mechanical equipment tucked into tight utility closets or attic pull-down spaces not the open garage installs common in newer San Antonio suburbs.
When those original builder-grade systems hit the 15–20 year mark, they fail fast especially during the hard freeze events that push Alamo Heights temperatures into the mid-20s for 48+ hours. A wrong-sized replacement unit in an older home with original galvanized ductwork loses efficiency within two seasons.
Honeycomb installs heat pumps, gas furnaces, and ductless mini-splits across every Alamo Heights neighborhood. We assess your existing ductwork (including galvanized runs common in pre-1975 builds), measure every room’s load with Manual J, and size the system to your specific home not a square footage estimate pulled from a chart. We install Amana and Goodman exclusively, both engineered for South Texas heat load with full manufacturer warranties.
Every install is transparent pricing, quoted in writing before work begins. Licensed TACLA140435E. Most Alamo Heights residential installations complete in a single day from removing the old unit to final walkthrough.
Our Process
How Our Heater Installation Process Works in Alamo Heights
Here’s exactly what happens when you call Honeycomb from your first call to the final city inspection. No surprises.
1. Schedule a Free In-Home Estimate
Call (726) 233-6044 or submit a request online. Omar Castilleja or one of our certified Alamo Heights–area technicians will visit your home within 1–2 business days no cost, no obligation. For older homes with deferred maintenance, same-day visits are available for urgent situations.
2. Duct Inspection & System Assessment
Our first priority in Alamo Heights homes is the ductwork. Pre-1975 builds frequently have galvanized steel ducts that restrict airflow and can’t support a modern high-efficiency unit. We document every run with photos before recommending anything. If ducts need work, we tell you upfront with a written estimate never a surprise add-on.
3. Manual J Load Calculation for Your Specific Home
Our technician performs a Manual J load calculation the only accurate way to size a system in a home with original 9–12 ft ceilings, single-pane windows, or minimal attic insulation (all common in Alamo Heights). Whether it’s a 1960s brick ranch near Cambridge Dr or a two-story on Nacogdoches, we size for your home, not a ZIP code average.
4. System Selection & transparent pricing
We present Amana and Goodman options with a transparent price for each single-stage heat pump from $10,800, two-stage from $14,200. No hidden fees, no hourly charges. We’ll also check your CPS Energy eligibility for energy efficiency rebates before any work begins.
5. Scheduled Installation Day
Our licensed install team Sergio Alfaro, Angel Alfaro, and Gil Mompaz arrives on time, removes your old unit, and installs the new system. We protect your Alamo Heights home throughout hardwood floors, narrow hallways, and original tile get covered. Most installs complete in 4–6 hours.
6. Permit Filing & City Inspection
Our Team pull all required permits through the City of San Antonio Development Services Department and schedule the city inspection within 5–7 business days. Permit fees run $75–$150 and are included in our transparent pricing. You never contact the permit office we handle everything.
7. System Testing & Final Walkthrough
Before we leave, we run a full system test across every zone to confirm peak performance in your home’s specific layout. We walk you through thermostat operation, filter schedules, and any CPS Energy efficiency program paperwork so you leave nothing on the table.
8. Post-Installation Support & The Comfy Club
Our team is always available for follow-up questions. Comfy Club members get priority scheduling and 15% off all future repairs keeping your Alamo Heights home comfortable year-round. Twice-yearly tune-ups also catch the oak and cedar pollen buildup that affects coil efficiency across Bexar County every spring.
aFFORDABLE Pricing. Experienced Team.
Affordable Pricing. Experienced Team.
Why Alamo Heights Homeowners Choose Honeycomb
They’re Your Neighbors, Not a Franchise
Brandon Caputo and Omar Castilleja founded Honeycomb in San Antonio not a corporate office in another state. They serve Alamo Heights, Terrell Hills, and the 78209 corridor because that’s where they work. 5.0★ from 622+ Google reviews from real homeowners backs that up.
You Know the Price Before They Arrive
Every heater installation is transparent pricing written in advance, zero hourly charges. No one starts work until you’ve approved the number. That’s the “no pressure” promise, not just a tagline.
Sized for Alamo Heights, Not a Spreadsheet
Alamo Heights’ original construction pier-and-beam foundations, galvanized ductwork, 9–12 ft ceilings, single-pane windows demands precise load calculations. A wrong-sized unit in a 1960s home fails faster than anywhere else. Honeycomb uses Manual J sizing on every job.
Credentials That Are Verifiable
License TACLA140435E. A-Rated BBB Accredited. Amana and Goodman certified installations. These aren’t claims they’re checkable facts. Honeycomb handles all permitting with the City of San Antonio Development Services you don’t make a single call to the permit office.
Support That Doesn’t Stop at Installation
The Comfy Club maintenance plan keeps your system running at peak efficiency members get priority scheduling and 15% off all future repairs. In a city where your system runs 9–10 months annually, that’s not optional, it’s smart.
Ranked Among San Antonio’s Best
Ranked #3 on MySanAntonio’s Best HVAC Companies list, Honeycomb Heating & Cooling prioritizes upfront transparent pricing and long-term system efficiency.
Your Alamo Heights Heater Installation Team
Founders
Brandon Caputo
Owner & Co-Founder
Brandon has been around construction and home services his entire career. He started managing for a house painting company in college, then moved to San Antonio where he worked in flooring and general contracting which is where he learned the trades, including HVAC. He founded Honeycomb after watching homeowners get overcharged by contractors they couldn’t trust, with no way to know if the price was fair. His son Grayson is Honeycomb’s biggest fan. When he’s not working, Brandon is in the gym or on the basketball court.
- Owner
- Co-Founder
Omar Castilleja
Master Technician & License Holder
Omar holds 27 years of residential HVAC experience and the company’s Texas HVAC license (TACLA140435E). He holds EPA 608 certification and a TDLR license, and personally oversees Honeycomb’s most complex installs including Alamo Heights’ pre-1975 homes with restricted equipment closets and original ductwork. Omar is most familiar with neighborhoods north of San Antonio Timberwood Park, Helotes, Bulverde, Stone Oak and understands Hill Country and inner-city home types better than most.
- TACLA140435E
- EPA 608
- TDLR Licensed
- 27 Yrs Experience
Installation & Service Team
Aaron Botts
Service Technician · 5 Yrs
Serves Alamo Heights, Timberwood Park, Bulverde, and Stone Oak. Aaron is known for thorough diagnostics and clear explanations he documents every step with photos. Outside of work, he paints murals.
- Background Checked
- Amana Trained
Steven Leon
Service Technician · 8 Yrs
Serves Alamo Heights, Timberwood Park, Bulverde, and Stone Oak. With 8 years of experience, Steven is one of Honeycomb’s most senior techs. Enjoys yard work and spending time with family.
- 8 Yrs Experience
- Background Checked
Sergio Alfaro
Install Technician · 5 Yrs
Handles new system installations across Alamo Heights, Terrell Hills, and Olmos Park. Sergio is part of the core install crew on every Alamo Heights job Goodman trained and install certified.
- Install Certified
- Goodman Trained
Angel Alfaro
Install Technician · 5 Yrs
Works alongside Sergio on Alamo Heights installs. Angel brings precision and a positive attitude to every job and brings both to the stage too, as he enjoys singing and performing.
- Install Certified
- Amana Trained
Gil Mompaz
Service & Install Tech · 4 Yrs
Handles both service calls and installs across Alamo Heights and Bexar County. His versatility means he can step in on diagnostics or full installs as needed. Likes fishing and playing soccer on weekends.
- Service & Install
- Background Checked
Alejandra Sotelo
Customer Service · 4 Yrs
Alejandra is the first voice you’ll hear when you call Honeycomb. She schedules Alamo Heights and Bexar County appointments, coordinates same-day service, and makes sure no customer falls through the cracks. Loves coffee and fancy dinners.
- 4 Yrs Experience
- Scheduling Lead
Schedule Service
Schedule an AC Installation in Alamo Heights
While many HVAC companies provide a one-size-fits-all furnace, Alamo Heights estates demand a more surgical approach. The local architecture, ranging from 1920s cottages to mid-century brick manors, often features narrow utility closets or vertical air handlers that modern equipment wasn’t designed to fit. At Honeycomb, we specialize in high-efficiency heating retrofits that respect the integrity of your vintage home while providing modern comfort.
We prioritize your home’s unique constraints by performing comprehensive load calculations to ensure new heating elements don’t overwhelm original electrical panels. This technical precision is combined with a focus on indoor air quality, specifically targeting the intense cedar pollen seasons that affect homes along the Broadway and Austin Highway corridors. Every system we install is engineered to deliver peak performance during San Antonio’s erratic winter freezes while maintaining the quiet operation expected in a 78209 residence.
Our commitment to transparency means you receive a $10,800 starting transparent price, avoiding the hidden premiums often associated with historic neighborhood service. Each project is personally managed by Omar Castilleja, a 27-year master technician (License #TACLA140435E), ensuring that your CPS Energy SaveNow rebate documentation is handled correctly for maximum savings.
What Our Customers Say
“When our heat pump failed during Boerne’s February freeze, we called Honeycomb at 7 AM. Omar arrived by 9:30 and had our new Amana system installed by 5 PM the same day. $14,200 total $3,000 less than the quote we got from a San Antonio company. Our Fair Oaks Ranch home has stayed warm all winter.”
“Aaron installed a gas furnace in our Cibolo home after our builder-grade heat pump died at 12 years. He explained why a furnace made sense for our house we have gas lines already and finished the job in one day. The city inspector passed it without any issues. Very professional team.”
Michael Thompson
“Steven installed a mini-split in our Comfort casita where we couldn’t run ductwork. The quote was clear, the install took 5 hours, and he cleaned up everything. Honeycomb handled the Boerne permit and inspection we didn’t have to do anything. Highly recommend for anyone in the Hill Country area.”
Deals & Specials
Free Nuve Thermostat with Install
Control your home temperature from anywhere. Can’t be combined with other offers.
Get a Free Air Scrubber with Install
Enjoy fresher air throughout your entire home! Can’t be combined with other offers.
Zero Interest with No Monthly Payment
Call for more details. Can’t be combined with other offers.
Alamo Heights & Bexar County Neighborhoods We Serve
Honeycomb provides heater installation throughout the Alamo Heights area from the 78209 zip code and Terrell Hills to Olmos Park, Castle Hills, and surrounding Bexar County neighborhoods. Our Hwy 281 N location puts us within 20–35 minutes of every Alamo Heights address.
Full Alamo Heights Coverage Every Neighborhood, Every ZIP
Don’t see your community listed? We still serve it call (726) 233-6044 to confirm same-day availability.
Alamo Heights & Immediate Area
- Alamo Heights (78209)
- Terrell Hills (78209)
- Olmos Park (78212)
- Alamo Heights School District Area
- Arcadia Place Corridor
- Cambridge Drive Area
- Nacogdoches Road Corridor
Surrounding Bexar County
- Castle Hills (78213)
- Hollywood Park (78232)
- Shavano Park (78231)
- North Central San Antonio
- Stone Oak (78258)
- Stone Oak Pkwy Corridor
- Timberwood Park Area
Heater Installation FAQ Alamo Heights, TX
How much does heater installation cost in Alamo Heights?
Heater installation in Alamo Heights starts at $8,500 for gas furnaces and $10,800 for heat pump systems, with most jobs ranging $10,800–$18,000 depending on system type and home layout. Two-stage and variable-speed systems run $14,200–$21,100. Alamo Heights homes with original ductwork may have an additional duct repair estimate ranging $400–$6,500 we quote that separately, in writing, before any work begins. Call (726) 233-6044 for a free estimate.
Do older Alamo Heights homes with galvanized ductwork need special equipment before heater installation?
Yes and this is one of the most important things to check before installation day. Alamo Heights homes built before 1975 frequently have original galvanized steel ducts that have partially collapsed, have leaking joints, or can’t support the airflow requirements of a modern high-efficiency unit. If we install a new system into degraded ductwork, you’ll lose 30–40% of efficiency on day one. Our process includes a full duct inspection and documentation with photos during the estimate visit. If duct work is needed, we provide a written estimate before recommending any system.
Who issues permits for heater installation in Alamo Heights, TX?
Alamo Heights addresses fall under the City of San Antonio Development Services Department for permitting purposes. All heater installations require a permit Honeycomb pulls the permit and coordinates the city inspection as part of every install. Permit fees run $75–$150 and inspections occur within 5–7 business days. Texas law requires a licensed contractor for permitted work. Our license: TACLA140435E. You make zero calls to the permit office.
What heater system works best for a 1960s Alamo Heights home with high ceilings and older windows?
Homes in the Alamo Heights school district area or along Arcadia Place with original 9–12 ft ceilings, single-pane aluminum-frame windows, and minimal attic insulation (R-11 or below, common in pre-1975 builds) lose heat from multiple directions simultaneously. A two-stage heat pump or a dual-fuel hybrid system (heat pump + gas furnace backup) handles those variable loads better than a single-stage unit. The hybrid option is especially smart for Alamo Heights freeze events when outdoor temps drop below 35°F the gas furnace kicks in automatically for intense heat output. We size every system with Manual J, not square footage.
How long does heater installation take in an Alamo Heights home?
Most Alamo Heights heater installations complete in 4–8 hours depending on system type and home layout. Homes with original utility closets or attic-mounted air handlers common in the 1958–1975 builds near Cambridge Drive may take longer due to clearance constraints. If we identify duct issues during the estimate, we’ll flag them upfront so there are no day-of surprises. Gas furnace installations that require new gas line runs may extend the timeline. Same-day completion is standard for straight heat pump replacements.
How quickly can Honeycomb respond for heater installation in Alamo Heights?
We offer same-day estimates within 24–48 hours for standard heater replacements in Alamo Heights. For emergency heating failures during freeze events which hit Alamo Heights’ older homes particularly hard we dispatch within hours, 24/7/365. Our Hwy 281 N location puts us within 20–30 minutes of most Alamo Heights and Terrell Hills addresses. Call (210) 972-7930 for immediate dispatch.
How often should I have my new heater serviced in Alamo Heights?
We recommend annual tune-ups before the first cold front season typically October or November in Alamo Heights. Our Comfy Club membership includes priority scheduling before cold fronts, annual tune-ups, repair discounts, and no service call fees. Heat pumps in Alamo Heights run 10–11 months annually (cooling + heating combined), making preventive maintenance especially critical. Most members save more than the membership cost in year one.
“Honeycomb Heating & Cooling (TACLA140435E) is a San Antonio-based, locally owned HVAC company. We are not affiliated with Honeywell or any national brand.“
Buzz us today for reliable HVAC solutions!
Request Service