G

Heat Pump
Installation
& Repair in
Bulverde, TX

Honeycomb Heating & Cooling installs and services dual-fuel heat pumps for 500+ Bulverde, Centennial Ridge, and Honey Creek homes. SEER2 16+ Amana systems qualify for PEC rebates and the $2,000 federal 25C tax credit. Licensed TACLA140435E. Same-day dispatch along the 46 Corridor for repairs. Free in-home estimate. Call (726) 233-6044.

HVAC technician testing a heat pump capacitor in Bulverde, TX to prevent electrical failure caused by extreme Hill Country heat and caliche dust buildup. Heat Pumps Services in Bulverde

We’ll Inspect your system, explain what we see, and let you decide what’s best for your home.

Name*
Address*

REPAIR | INSTALLATION | TUNE-UP: We’ll provide the facts, then you pick the fix that fits your budget.

BBB Credited

Heat Pump Services — Bulverde, TX

What We Install & Service
in Comal County

Three reasons Bulverde homeowners call Honeycomb first — not just for any heat pump, but for the right system for Hill Country conditions.

🌡️
Heat Pump Installation
SEER2 16+ Systems

Bulverde’s temperature swings — 100°F+ summers and occasional Hill Country freezes — demand systems built for both. We exclusively install Amana and Goodman SEER2 16+ heat pumps, engineered for high-heat Texas climates with Amana’s Lifetime Unit Replacement Warranty.

💰 $10,800-$21,100 installed · PEC rebate eligible · $2,000 federal 25C tax credit


PEC Energy Savings
Slash Your CPS / PEC Bill


Bulverde sits in Pedernales Electric Cooperative (PEC) territory. Switching from electric strip heat to a SEER2 heat pump typically reduces winter heating costs by 30–50%. A properly sized system for a 2,000 sq ft home in Centennial Ridge runs $90–$130/month year-round vs. $140–$200+ with separate aging components.

💡 PEC rebates $300–$600 · Verified during free estimate

🔥
Dual-Fuel Hybrid Systems
Hill Country Gold Standard


A dual-fuel system pairs a heat pump with a gas furnace backup — perfect for Centennial Ridge and Honey Creek homes with existing gas lines. The heat pump runs 90% of the season for maximum efficiency; below ~35°F, it automatically switches to gas for complete Hill Country freeze coverage.

🏡 Ideal for Comal County rural properties · Handles freeze events fully

A reliable heat pump installation follows a clear process from start to finish. Here’s what to expect when you schedule with Honeycomb for your Bulverde or Comal County home:

What Our Customers Say

Armando and Aaron, are extremely courteous, and friendly. Showed up on time, informed us of the steps, and the job to their best, explained me the issues, and the solutions. Documented all the work. Would highly recommend.

Sameer A.

Honeycomb was fantastic. Not only did they get to me fast, the repairmen (Dorian & Fernando) were friendly, professional, they explained everything, and got the work done quickly. And the best part, they were able to diagnose the issue, after another company told me my whole unit need to be replaced. Definitely recommend them!

Lisa C.

Friendly, clean and professional! Angel & Manuel were great! They came out right away and made everything right for me!

Tracy G.

Honeycomb Heating & Cooling

Free Nuve Thermostat with Install

Control your home temperature from anywhere. Can’t be combined with other offers.

Honeycomb Heating & Cooling

Get a Free Air Scrubber with Install

Enjoy fresher air throughout your entire home! Can’t be combined with other offers.

Honeycomb Heating & Cooling

Zero Interest with No Monthly Payment

Call for more details. Can’t be combined with other offers.

Bulverde & Comal County Neighborhoods We Serve

Heat pumps are particularly cost-effective in Bulverde, Centennial Ridge, and Honey Creek — areas with older electric resistance heating and no natural gas lines, where switching to a heat pump delivers significant efficiency gains. Along the Spring Branch corridor and newer Comal County developments, heat pumps replace aging split systems with a single efficient unit.

Bulverde Core & Hwy 281 N Corridor

  • Smithson Valley (78163)
  • Johnson Ranch (78163)
  • Bulverde Village (78163)
  • Timberwood Park (78260)
  • Bergheim
  • Bulverde Estates

Hwy 46 Corridor & East Bulverde

  • Centennial Ridge (78163)
  • Overlook at Bulverde
  • Spring Branch (78070)
  • Comal Trace
  • Saddlehorn

Canyon Lake & North Comal County

  • Canyon Lake (78133)
  • Sattler
  • Startzville
  • Waggener Ranch

HEAT PUMPS FAQ BULVERDE

Do Heat Pump Work During Hill Country Freezes in BuLverde?

Yes — modern SEER2 heat pumps operate efficiently down to 5°F. Bulverde averages only 15–20 hard freeze days per year. For added freeze protection, Honeycomb installs dual-fuel hybrid systems that pair a heat pump with a gas furnace backup, giving Comal County homeowners 100% coverage across all temperature extremes. The heat pump handles 90%+ of the season; the furnace takes over only when needed. Call (726) 233-6044 to discuss which setup is right for your home.

What PEC rebates are available for heat pumps in Bulverde?

Pedernales Electric Cooperative (PEC) offers rebates for qualifying high-efficiency heat pump installations in Bulverde and Comal County. SEER2 15+ systems may qualify for $300–$600 in PEC rebates. Combined with the federal 25C Energy Efficient Home Improvement Tax Credit (up to $2,000), eligible Bulverde homeowners can significantly reduce installation costs. Honeycomb verifies your eligibility during the free in-home estimate and helps with rebate paperwork.

How much does heat pump installation cost in Bulverde, TX?

Heat pump installation in Bulverde typically ranges from $10,800-$21,100 depending on system size (tonnage), SEER2 efficiency rating, and ductwork condition. A 3-ton Amana SEER2 18 system for a standard Centennial Ridge or Honey Creek home (1,500–2,500 sq ft) generally falls in the $4,500–$6,500 range before PEC rebates and the $2,000 federal tax credit. Honeycomb provides flat-rate quotes — the price you approve is the price on your invoice.

What is a dual-fuel hybrid heat pump and do I need one in Bulverde?

A dual-fuel hybrid system pairs a high-efficiency heat pump with a gas furnace backup. When temperatures drop below the heat pump’s efficiency threshold (typically below 35°F), the system automatically switches to gas heat. For Bulverde and Comal County homes with existing gas lines, dual-fuel is often the most cost-efficient setup — you get heat pump efficiency 90% of the heating season, with complete gas reliability during Hill Country cold snaps. Honeycomb will recommend dual-fuel or standard heat pump after assessing your home.

Does Honeycomb pull Comal County permits for heat pump installs?

Yes. All Honeycomb heat pump installations in Bulverde and Comal County include permit coordination. We’re licensed under Texas HVAC License TACLA140435E and handle all required Comal County mechanical permits and final inspections as part of the job. No work begins without proper permits in place — and no installation is signed off until it passes county inspection. This is required for manufacturer warranties and PEC rebate paperwork.

How long does heat pump installation take at a Bulverde home?

Most residential heat pump installations in Bulverde take 4–8 hours. Our background-checked technicians handle removal of the old system, installation, refrigerant charging, electrical connections, Comal County permit coordination, and full system testing. Most customers along the 46 Corridor — Centennial Ridge, Honey Creek, Spring Branch — have a working system by end of day. All work is photographed and documented before we leave.

“Honeycomb Heating & Cooling (TACLA140435E) is a San Antonio-based, locally owned HVAC company. We are not affiliated with Honeywell or any national brand.”

Buzz us today for reliable HVAC solutions!