Heating Services in Castle Hills, TX
Most Castle Hills homes run gas furnaces that sit dormant for 9–10 months each year. When temperatures drop overnight in December or January, these systems fire for the first time with oxidized flame sensors and stiff gas valves and fail. Honeycomb provides heating repair, installation, and maintenance across Castle Hills. Repairs from $300 to $2,000. Licensed TACLA140435E. Call (726) 233-6044.

start with a
no pressure visit
We’ll Inspect your system, explain what we see, and let you decide what’s best for your home.
Call Now: (726) 233-6044
REPAIR | INSTALLATION | TUNE-UP: We’ll provide the facts, then you pick the fix that fits your budget.

100% Satisfaction Guarantee
Responsive & Timely Service
Licensed #TACLA140435E

When Your Furnace Has Been Off Since March
Castle Hills’ Unique Heating Problem
Castle Hills gas furnaces sit completely idle from March through November, the longest dormancy period of any residential heating configuration in South Texas. Dust coats burner surfaces. Flame sensors oxidize from residual combustion gases trapped in tight utility closets. Gas valve diaphragms stiffen. Draft inducer bearings seize. The first blue norther of December is often the literal first test run and that’s when most Castle Hills heating failures happen.
Castle Hills winters average 40–50°F with occasional hard freezes and when temperatures drop fast, a failing heater can’t wait. Honeycomb provides heating repair, installation, and maintenance across all of Castle Hills, with upfront pricing quoted before any work begins. Check current seasonal specials before booking.
Our service technicians understand the specific heating configurations of Castle Hills’s diverse residential stock from the aging single-duct gas furnaces in enclosed-lot ranch homes along Vance Jackson to the heat pump systems in more recently updated properties near Lockhill-Selma. For indoor air quality standards that apply during heating season, see the Texas Commission on Environmental Quality.
All heating services are performed by background-checked technicians under Texas License TACLA140435E, ensuring your home meets San Antonio mechanical code requirements.
9–10
Months per year Castle Hills furnaces sit dormant, the longest idle period common in South Texas
40–50°F
Average Castle Hills winter range, cold enough to expose every weak point in a dormant system
$300
Starting price for heating repairs, quoted in writing before any work begins, no surprise fees
24/7
Emergency heating dispatch because blue northers don’t arrive during business hours
Our Castle Hills Heating Services
What Honeycomb Services
in Castle Hills
A professional heating service should start with an honest diagnosis, especially in homes where the system hasn’t run in months.
Heater Installation
If your Castle Hills furnace is beyond serviceable condition, Honeycomb installs Amana and Goodman systems sized correctly for South Texas’s light heat load. An oversized furnace in a Castle Hills ranch home will short-cycle, heating unevenly and causing humidity problems in the enclosed floor plan. Every installation starts with a free estimate. Financing options are available through GoodLeap and Synchrony.
Heater Repair
When your Castle Hills heating system stops working or struggles to hold temperature, our technicians diagnose the issue and complete the repair using quality parts. Repairs run from $300 to $2,000 and we provide a written quote before any work begins. For urgent heating emergencies, same-day service is available when we’re not fully booked. The most common Castle Hills repair scenarios are flame sensor oxidation, draft inducer failure, and heat exchanger surface damage, all products of the long dormancy period between heating seasons.
Heater Maintenance, Schedule Before December
Regular maintenance prevents first-start failures and keeps your heating system ready for Castle Hills winters. In San Antonio, the optimal window is October before November when overnight temperatures can drop below freezing fast. A first-start diagnostic in October ensures your system fires cleanly before the first blue norther arrives. Contact us for maintenance pricing and to confirm your system is prepared for the first South Texas cold snap.
Heat Pumps, Efficient for SA’s Mild Winters
Heat pumps are a practical choice for Castle Hills properties that have already upgraded their ductwork, because they provide both heating and cooling in one system. San Antonio’s mild winters make heat pumps especially efficient, they work harder as cooling units than as heating units in this climate. Because heat pumps don’t rely on fossil fuels, they’re a cost-effective option for modern properties near NW Military Highway looking to reduce CPS Energy bills. High-efficiency heat pump installations may qualify for CPS Energy SaveNow rebates, we handle all rebate paperwork.
Radiant Heater Service
A number of Castle Hills homes built in the 1950s and early 1960s were never converted from their original radiant heating setups to forced-air systems. Honeycomb technicians service and install radiant heating systems, ensuring they deliver consistent warmth through the home without disrupting original architectural features or requiring invasive ductwork modifications.
First-Start Dormancy Diagnostic
This is the service most unique to Castle Hills. Before the first cold night of the year, Honeycomb performs a complete first-start evaluation, checking flame sensor condition, draft inducer operation, gas valve response, heat exchanger surface integrity, and burner assembly for corrosion from months of dormancy. If your system hasn’t run since last winter, this diagnostic is the most cost-effective way to guarantee it won’t fail at 2 AM during a January freeze. Recognized among the best HVAC companies in San Antonio by MySanAntonio.

The Best Pricing. Experienced Team.
Your Castle Hills
Heating Technicians
Why Choose Honeycomb for Castle Hills Heating?
They’re Your Neighbors, Not a Franchise
Honeycomb Heating & Cooling is a San Antonio–founded company led by Brandon Caputo and Omar Castilleja, boasting over 622+ 5.0★ reviews from families across the city. We aren’t a national franchise, we are local experts who understand the specific heating configurations of South Texas homes. Recognized as one of the Best HVAC Companies in San Antonio, we prioritize upfront pricing and long-term system efficiency.
Written Quote Before Any Work Begins, No Surprise Fees
We believe in total transparency. Whether it’s a minor sensor fix or a major component replacement, our heating repairs start at $300 to $2,000. We provide a firm, written quote before any work begins so you never have to worry about hourly “emergency” fees during a cold snap. Visit our financing options if you need to spread the cost of a larger repair or replacement.
Castle Hills’s Heating Season Is Short But Unforgiving
With Castle Hills winters averaging 40–50°F and occasional hard freezes hitting between December and February, your system needs to work the first time you flip the switch. Since many Castle Hills furnaces sit dormant for 9–10 months, we specialize in “first-start” diagnostics to ensure your home stays safe and warm when temperatures plummet overnight.
Heat Pumps or Furnaces, We Service Both
Castle Hills’s mild climate makes heat pumps an increasingly efficient choice, but many older homes along Vance Jackson and NW Military Highway still rely on traditional gas furnaces. We have the specialized tools and experience to service both, ensuring your equipment is calibrated for maximum efficiency and lower CPS Energy bills.
Credentials That Are Verifiable
Our expertise is backed by Texas License TACLA140435E, an A+ BBB Accreditation. We provide professional-grade service that meets all San Antonio mechanical codes. Meet the full team →
Aaron Botts
Service Tech, 5 yrs
Aaron is one of Honeycomb’s primary service techs for northwest San Antonio. In 5 years he’s performed hundreds of first-start diagnostics in Castle Hills, Stone Oak, and Bulverde to catch the flame sensor oxidation and inducer failures that develop during the long dormancy season. When he’s not diagnosing HVAC systems, Aaron paints murals around San Antonio.
Steven Leon
Service Tech, 8 yrs
With 8 years of San Antonio HVAC experience, Steven is one of Honeycomb’s most tenured technicians. He specializes in older system diagnostics, focusing particularly on the gas valve and heat exchanger issues that develop quietly in systems running only 2–3 months per year. Castle Hills mid-century furnace configurations are a regular part of his territory. Spends weekends with his family.
Gil Mompaz
Service & Install, 4 yrs
Gil covers SA-wide heating service and install calls. His 4 years with Honeycomb include a wide range of Castle Hills heating configurations, including original radiant setups that were never converted to forced air, to more recent heat pump conversions in updated ranch properties. Into fishing and soccer when not on a job.
Angel Alfaro
Install Technician, 5 yrs
Angel handles heating installations across Stone Oak and northwest San Antonio, including Castle Hills. His 5 years of install experience includes correctly sizing Amana and Goodman systems for South Texas’s light heat load, which is a critical step in enclosed-lot Castle Hills homes where an oversized furnace will short-cycle. Enjoys singing and performing.
Schedule Service
Schedule Your Castle Hills
Heating Service
Whether your heater stopped working on a cold Castle Hills night or you’re planning ahead before the December freeze, Honeycomb is ready to help. Repairs start from $300 to $2,000, with a written quote provided before any work begins. We offer free estimates on new installations and financing options through GoodLeap and Synchrony.
For urgent heating emergencies, see our emergency HVAC service. Same-day service is available when urgent heating issues arise and we are not fully booked.
We serve every neighborhood across Castle Hills, including properties along Vance Jackson Road to NW Military Highway, Lockhill-Selma, and everywhere in between. Most appointments available within 1–2 business days.
Call: (726) 233-6044
1. First-Start Dormancy Check
Before anything else, we verify whether this is a first-start scenario where your Castle Hills system hasn’t run since last winter. If it has, standard diagnostic protocols apply. If it hasn’t, we specifically inspect flame sensor oxidation, inducer motor condition, and gas valve diaphragm response before any cleaning begins. This step alone prevents the majority of Castle Hills heating failures.
Castle Hills–Specific Diagnostic
2. Full System Inspection
Your technician, who will be Aaron Botts or Steven Leon for most northwest San Antonio calls, performs a complete system diagnostic: burner assembly, heat exchanger surfaces, gas valve, flue pipe integrity, condensate drainage (if applicable), thermostat calibration, and airflow at all registers. Every component is evaluated before any cleaning or repair begins.
Background-Checked Technician
3. Cleaning & Component Restoration
Burner assembly is cleaned of 9-month dust accumulation. Flame sensor is cleaned of oxidation buildup. Flue pipe is inspected for blockage. Condensate lines are cleared if applicable. Blower assembly is serviced. This step alone often restores full heat output in Castle Hills systems that were running at degraded efficiency without the homeowner realizing it.
4. Written Quote & Approval
If any repairs beyond the service are recommended, we provide a complete written quote before any work proceeds. The number you approve is the number on the invoice with no surprise labor charges and no emergency premiums on weekend calls. You decide what gets done, and when.
Written Quote, No Surprises
4. Heat Test & Performance Confirmation
Before leaving, we run a full system test across every zone and register. Castle Hills ranch homes with single-duct configurations often have rear-room temperature discrepancies we document for the customer. You receive a written summary that includes notes on what was serviced, what’s in good condition, and what to watch before the next heating season.
Written Report Included
5. Cleaning & Component Restoration
Burner assembly is cleaned of 9-month dust accumulation. Flame sensor is cleaned of oxidation buildup. Flue pipe is inspected for blockage. Condensate lines are cleared if applicable. Blower assembly is serviced. This step alone often restores full heat output in Castle Hills systems that were running at degraded efficiency without the homeowner realizing it.
6. Comfy Club Post-Service Support
Comfy Club members receive priority scheduling and 15% off all future repairs. This helps in keeping your Castle Hills home warm through every South Texas winter. Questions after your service? Our team picks up. Call (726) 233-6044 anytime.
Comfy Club: Priority Service

CPS Energy SaveNow Rebates, We Handle the Paperwork
Castle Hills homeowners on CPS Energy may qualify for SaveNow rebates when high-efficiency heating systems are installed by a qualified contractor. Honeycomb identifies your eligibility and submits rebate documentation on your behalf with no additional cost. The Texas Commission on Environmental Quality (TCEQ) requires that any work affecting refrigerant be performed by a licensed contractor. License TACLA140435E confirms Honeycomb meets that standard. Call (726) 233-6044 to confirm eligibility before your visit.
CPS Energy SaveNow Rebates — We Handle the Paperwork
Castle Hills homeowners on CPS Energy may qualify for SaveNow rebates when high-efficiency heating systems are installed by a qualified contractor. Honeycomb identifies your eligibility and submits rebate documentation on your behalf — at no additional cost. The Texas Commission on Environmental Quality (TCEQ) requires that any work affecting refrigerant be performed by a licensed contractor — License TACLA140435E confirms Honeycomb meets that standard. Call (726) 233-6044 to confirm eligibility before your visit.
What Our Customers Say
Javier and Manuel came in today for our winter tune up and to install their new thermostat. As always, excellent service!
Aaron B. was able to quickly come out and fix a wiring problem (from a previous company) that caused our heater to stop working. He was thorough, friendly and dedicated to taking care of our needs. I would recommend Aaron and Honeycomb heating & cooling.
Excelente Aaron explained everything he was doing and kept me informed on my options he was Great. And I will recommend this company to my friends and family and neighbors.
Deals & Specials
Free Nuve Thermostat with Install
Control your home temperature from anywhere. Can’t be combined with other offers.
Get a Free Air Scrubber with Install
Enjoy fresher air throughout your entire home! Can’t be combined with other offers.
Zero Interest with No Monthly Payment
Call for more details. Can’t be combined with other offers.
Castle Hills Neighborhoods
We Serve
Castle Hills’s heating needs vary block by block. Homes on enclosed lots along Vance Jackson often have original gas furnace configurations with tight utility room clearances. Properties near NW Military Highway tend to have more recently updated HVAC setups, including some heat pump conversions. Honeycomb services all of them.
Full Castle Hills Coverage, Every Street, Every Zip Code.
Don’t see your specific street listed? We still serve it. Call (726) 233-6044 to confirm same-day availability. No trip fee for any Castle Hills address.
Castle Hills Core Streets
- Vance Jackson Road Corridor
- Lockhill-Selma Road Properties
- NW Military Highway Homes
- Ximenes Avenue Area
- Castle Hills Forest
- Castle Hills Proper (All Streets)
Adjacent Communities
- Shavano Park
- Leon Valley
- Hollywood Park
- Hill Country Village
- Far North Central San Antonio
- Medical Center Area

Heating FAQ
Castle Hills, TX
Why does my Castle Hills furnance blow cold air the first time I turn it on in winter?
Castle Hills gas furnaces typically sit dormant for 9–10 months each year. During that period, flame sensors oxidize from residual combustion gases trapped in tight utility closets, gas valve diaphragms stiffen from inactivity, and draft inducer motors can seize. When temperatures drop overnight in December or January, these degraded components prevent the system from completing a clean ignition cycle. As a result, the furnace lights briefly and shuts down, blowing cold air. A pre-season diagnostic in October or November catches every one of these issues before the first cold night. Call (726) 233-6044 to schedule.
Do Castle Hills mid-Century ranch homes need a furnance or a heat pump?
Most Castle Hills homes built in the 1950s–1970s were designed around gas furnace infrastructure. These include floor registers, single-duct layouts, and gas line positioning that makes a full heat pump conversion expensive without ductwork modification. If your existing gas furnace is under 15 years old and in serviceable condition, repair or maintenance is usually more cost-effective than a full system change. Newer heat pump systems are more practical in Castle Hills properties that have already upgraded their duct layout. We evaluate your specific home configuration instead of giving a one-size-fits-all recommendation. Check if your upgrade qualifies for CPS Energy SaveNow rebates.
Why do Castle Hills furnances corrode faster than system in newer San Antonio neighborhoods??
Castle Hills homes are enclosed-lot properties with limited attic and utility room ventilation. During the 9–10 months these systems sit dormant, residual combustion gases and condensation have nowhere to escape, which accelerates corrosion on heat exchanger surfaces and burner assemblies. Systems in open-lot newer builds in Stone Oak or Alamo Ranch have better air circulation around the unit during dormancy, which slows this degradation. It’s why first-start diagnostics in Castle Hills are more critical than in those neighborhoods.
When is the best time to schedule heating maintenance in Castle Hills?
October is the ideal window for Castle Hills homeowners. Technicians are available same-week, parts are in stock, and any first-start issue can be identified and corrected before you need the system during a January freeze. By the time a blue norther arrives in December, every HVAC company in San Antonio is competing with emergency calls. A system that sat dormant all summer needs to be ready when it counts and October is when you can ensure that without urgency or emergency pricing.
How much does heating repair cost in Castle Hiils, TX?
Heating repairs in Castle Hills typically run from $300 to $2,000 depending on the component and system type. Honeycomb provides a written quote before any work begins. The number you approve is the number you pay. Common Castle Hills repairs include flame sensor replacement, draft inducer motor service, heat exchanger surface cleaning, and gas valve diagnostics on aging gas furnaces. If the repair cost approaches replacement cost, we’ll tell you. We’ll also provide a free estimate on a new system. Financing options are available through GoodLeap and Synchrony for larger repairs or full installations.
“Honeycomb Heating & Cooling (TACLA140435E) is a San Antonio-based, locally owned HVAC company. We are not affiliated with Honeywell or any national brand.”


