G

Same-Day Heater Repair Boerne, TX —Heat Pumps, Furnaces & Mini-Splits,
Flat-Rate

HVAC technician performing furnace diagnostics and heating repair in a Boerne attic to address airflow restrictions caused by caliche dust.

We’ll Inspect your system, explain what we see, and let you decide what’s best for your home.

Name*
Address*

REPAIR | INSTALLATION | TUNE-UP: We’ll provide the facts, then you pick the fix that fits your budget.

BBB Credited

Common Repair Issues · Boerne

4 Most Common Heater Problems
We Fix in Boerne

Boerne’s unique climate — mild winters punctuated by sudden Hill Country cold fronts — creates specific failure patterns in the area’s aging heat pump and furnace stock. Here’s what we see most often.

🔄
Heat Pump Not Heating

Most common in Boerne’s 1990s–2000s heat pump stock found in Cascade Hills and established Kendall County neighborhoods. When a cold front arrives and the reversing valve sticks in cooling mode, the system blows cold air in “heat” mode. Often misdiagnosed as a full system failure — Honeycomb diagnoses before recommending replacement.

💨
Furnace Blowing Cold Air

Gas furnaces — more common in Boerne’s older homes near Main Street and the historic downtown district — most often fail at the ignitor or flame sensor. When these components fail, the burner won’t light but the blower circulates cold air. Often looks like a major failure but is typically a $300–$2,000 repair that Honeycomb stocks parts for.

🌡️
Thermostat Issues

Thermostat miscommunication is the most under-diagnosed heater problem in Boerne. Smart thermostats common in newer Herff Ranch and Fair Oaks Ranch builds can lose their heating schedule after a power outage or firmware update. Older mechanical thermostats in pre-2000 Boerne homes drift out of calibration. Honeycomb checks thermostat wiring, settings, and compatibility before assuming a larger system issue.

🔁
System Cycling On/Off

Short-cycling — when a system turns on and off every few minutes — is often caused by a dirty filter, a faulty capacitor, or an oversized system that overheats and trips its safety shutoff. In Boerne and Kendall County, caliche dust and cedar pollen (December–February) clog filters faster than in urban areas. Often the cheapest fix on the list.

Here’s exactly what happens when you call Honeycomb for heater repair in Boerne — from your first call to a working system.

Local Regulations

Do You Need a Permit for Heater Repair in San Antonio?

Permit Requirements for Heater Repair in San Antonio

NO PERMIT
For most repairs — no permit is required. Replacing a capacitor, flame sensor, ignitor, reversing valve, thermostat, or other component on an existing system generally does not require a permit in Boerne or Kendall County. These are considered maintenance repairs on an existing permitted installation.

PERMIT REQUIRED
When a permit IS required: If the repair involves replacing the refrigerant coil, heat exchanger, or any work that modifies the system’s original permitted configuration, a mechanical permit ($75–$150 estimated) may be required through the City of Boerne Building Department (for properties within city limits) or Kendall County (for unincorporated properties). Honeycomb will advise you upfront if your repair scope requires one.

Texas state law requires all HVAC repair work to be performed by a licensed contractor. Our license: TACLA140435E. Unlicensed “handyman” HVAC repairs can void your manufacturer warranty and create liability issues.

Sources: City of Boerne Building Department · Kendall County · Texas TDLR (TACLA licensing)

What Our Customers Say

Javier and Manuel came in today for our winter tune up and to install their new thermostat. As always, excellent service!

Christian Tapia

Aaron B. was able to quickly come out and fix a wiring problem (from a previous company) that caused our heater to stop working. He was thorough, friendly and dedicated to taking care of our needs. I would recommend Aaron and Honeycomb heating & cooling.

Daynon Gonzalez

Excelente Aaron explained everything he was doing and kept me informed on my options he was Great. And I will recommend this company to my friends and family and neighbors.

Hilario Nayola

Honeycomb Heating & Cooling

Free Nuve Thermostat with Install

Control your home temperature from anywhere. Can’t be combined with other offers.

Honeycomb Heating & Cooling

Get a Free Air Scrubber with Install

Enjoy fresher air throughout your entire home! Can’t be combined with other offers.

Honeycomb Heating & Cooling

Zero Interest with No Monthly Payment

Call for more details. Can’t be combined with other offers.

Boerne & Kendall County Neighborhoods We Serve

Honeycomb provides heater repair throughout Boerne and Kendall County — from North Side neighborhoods hit hardest by cold fronts (Timberwood Park, Bulverde) to the Hill Country communities (Boerne, Spring Branch) and the Hwy 281 corridor. Our location near Hwy 281 N puts us within 20–35 minutes of most Boerne zip codes.

Master-Planned & Gated Communities

Boerne Central & IH-10 Corridor

Surrounding Kendall County Communities

heater repair faq san antonio

Why is my heater not working in Boerne, TX?

The most common causes in Boerne Hill Country homes: a heat pump not switching to heating mode when a cold front drops overnight temps below 30°F (reversing valve failure); a gas furnace ignitor or flame sensor failure causing the blower to circulate cold air; thermostat miscommunication — especially after a power outage during freeze events; or short-cycling from a filter clogged with Kendall County cedar pollen. Honeycomb offers same-day diagnosis — call (726) 233-6044.

How much does heater repair cost in Boerne, TX?

Most heater repairs in Boerne range from $300 to $2,000. A standard diagnosis and minor fix — like a flame sensor or capacitor — typically starts around $300. More complex repairs such as a reversing valve replacement or blower motor run higher within that range. Honeycomb provides a flat-rate written quote before any work begins — the price you approve is the price on your invoice.

How long does a heater repair take in Boerne?

Most heater repairs in Boerne take 1–3 hours once the technician arrives. Because Honeycomb stocks parts common to Amana and Goodman systems — the most common systems in Boerne and Kendall County — Aaron Botts and Steven Leon complete most repairs the same day. For emergency calls during Hill Country cold fronts, we prioritize same-day dispatch to restore heat immediately.

Should I repair or replace my heating system in Boerne?

If your system is over 12–15 years old and repair costs exceed 50% of replacement value, replacement is usually smarter for long-term GVEC bill savings. However, for many Boerne homes with 1990s–2000s heat pumps, a specific repair like a reversing valve or ignitor can extend the system’s life for several more Hill Country winters. Honeycomb gives honest repair-vs-replace guidance — no pressure either way.

Do you offer emergency heater repair in Boerne?

Yes. Honeycomb offers 24/7 emergency heater repair throughout Boerne and Kendall County. Hill Country cold fronts can drop Boerne temperatures below 30°F overnight, making a working heater a safety priority. Call (726) 233-6044 for immediate same-day dispatch — regardless of the time or day.

Can you repair all heating system types in Boerne?

Yes. Honeycomb repairs heat pumps, gas furnaces, and ductless mini-splits — all major brands found in Boerne and Kendall County homes. Our team is trained on the high-efficiency units common in newer Herff Ranch and Fair Oaks Ranch developments, and the older gas systems found in historic Boerne homes near Main Street and Cascade Hills.

How quickly can Honeycomb respond for heater repair in Boerne?

We offer same-day emergency dispatch during cold fronts, and standard repair appointments within 1–2 business days. From our Hwy 281 N location, we typically reach Boerne within 20–35 minutes — through Bulverde, Timberwood Park, and into Boerne itself. Call (726) 233-6044 for fast, no-pressure diagnosis.

Do I need a permit for heater repair in Boerne?

For most repairs — replacing a capacitor, flame sensor, ignitor, reversing valve, or thermostat — no permit is required in Boerne. A permit through the City of Boerne Building Department or Kendall County is typically required when the repair involves replacing a refrigerant coil, heat exchanger, or any work that modifies the system’s original permitted configuration. Honeycomb will advise you upfront if your repair requires one.

When do heaters break down most in Boerne?

Boerne heating failures peak December–February when Arctic cold fronts push overnight temps below 30°F. Heat pumps that haven’t switched to heating mode in months are most vulnerable — reversing valves seize, capacitors fail, and cedar pollen clogs filters. October–November is the best time to test your system and schedule a pre-season diagnostic before the first cold front arrives.

Are your technicians licensed and insured for heater repair in Boerne?

Yes. All Honeycomb heater repairs are performed under Texas HVAC License TACLA140435E, held by Omar Castilleja with 27 years of experience. Every technician is background-checked and trained on the specific failure patterns common in Boerne and Kendall County home stock. Full liability insurance. BBB A-Rated accredited. 5.0★ from 500+ Google reviews.

“Honeycomb Heating & Cooling (TACLA140435E) is a San Antonio-based, locally owned HVAC company. We are not affiliated with Honeywell or any national brand.”

Buzz us today for reliable HVAC solutions!